Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2011 >> Genesis Sedan V6-3.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Cabin Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cabin Temperature Sensor / Switch: Service and Repair





Inspection

1. Ignition "ON"
2. Blow air with changing temperature to the in car sensor air inlet. Measure sensor resistance between 2 and 4 terminals.

Specification






NOTE:
In car sensor is negative type thermistor that resistance will rise with lower temperature, and reduce with higher temperature.

Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad side cover (A).




3. After loosening the mounting screws, remove the lower panel (A).




4. Disconnect the connector (A).








5. After loosening the mounting bolts, then remove the reinforcing panel (A).




6. Disconnect the connector of in-car sensor. Loosen the mounting 2 screws and then remove the in-car sensor (B).




7. Installation is the reverse order of removal.
pro multis · About Operation CHARM