Fuel Filler Neck: Service and Repair

Removal

1. Remove the rear-LH wheel, tire, and the inner wheel house.
2. Disconnect the fuel filler hose (A) and the ventilation hose (B).




3. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).




4. Remove the filler-neck assembly from the vehicle after removing the bracket mounting nut (A).






Installation

1. Installation is reverse of removal.

Filler-neck assembly bracket installation nut :
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb-ft)