Cellular Phone Microphone: Service and Repair
Removal
1. Disconnect the negative(-) battery terminal.
2. Remove the steering wheel.
3. Remove the cover (A) after loosening screws.
4. Disconnect the upper and lower steering wheel remote control switch connector (A) in the left.
5. Remove the steering wheel remote control switch assembly (A) after loosening screws.
Installation
1. Install the hands free switch to the steering wheel.
2. Install the steering wheel.
3. Reassemble the driver airbag module.
NOTE:
Make sure the hands free remote control switch and the airbag module connectors are plugged in properly.
Inspection
1. Check BCM input/output specification of SWRC using the GDS.