Front Lower Arm

Replacement

1. Remove the front wheel & tire.

Tightening torque :
88.3 - 07.9N.m(9.0 - 11.0Kgf.m, 65.1 - 79.6lb-ft)

CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel & tire.Loosen the bolt & nut and then remove the lower arm(A).

2. Loosen the bolt & nut and then remove the lower arm(A).

Tightening torque :
98.1 - 117.7N.m(10.0 - 12.0Kgf.m, 72.3 - 86.6lb-ft)




3. Remove the front lower arm(A) and than loosen the bolts & nuts.

Tightening torque :
Front
98.1 - 117.7N.m(10.0 - 12.0Kgf.m, 72.3 - 86.6lb-ft)
Rear
137.3 - 156.9N.m(14.0 - 16.0Kgf.m, 101.3 - 115.7lb-ft)




4. Installation is the reverse of removal.

Inspection

1. Check the bushing for wear and deterioration.
2. Check the lower arm for bending or breakage.
3. Check the lower arm for deformation.
4. Check the all bolts and nuts.