Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2012 >> Veracruz AWD V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Front Wheel Speed Sensor >> Repair Procedures
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Repair Procedures





Removal

1. Remove the front wheel speed sensor mounting bolt (A).




2. Remove the front wheel speed sensor bracket (A).




3. Remove the front wheel guard.
4. Disconnect the front wheel speed sensor connector (A) , then remove the front wheel speed sensor.






Inspection

1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.

CAUTION:
In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ohms resister must be used as shown.




2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.





V_low : 0.44V ~ 0.63V
V_high : 0.885V ~ 1.26V
Frequency range : 1 - 2,500Hz

pro multis · About Operation CHARM