Repair Procedures

Removal

1. Remove the rear wheel and tire.

Tightening torque:
88.3 - 107.9 N.m (9.0 - 11.0 kgf.m, 65.1 - 79.6 lb-ft)

2. Remove the rear wheel speed sensor mounting bolt (A).

Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)




3. Remove the rear wheel speed sensor cable mounting bolt.
4. Remove the rear wheel house trim.

5. Disconnect the rear wheel speed sensor connector (A), and than remove the rear wheel speed sensor.




6. Install in the reverse order of removal.

CAUTION:
Install the rear sensor after lubricating the O-ring of sensor with the assembly fluid(RAREMAAF-1)
When inserting the sensor, take care the O-ring not to be damaged.