Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Elantra GT L4-1.8L >> Repair and Diagnosis >> Cruise Control >> Cruise Control Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cruise Control Switch: Service and Repair





Removal and Installation

1. Disconnect the battery (-) terminal.
2. Remove the air-bag module from the steering wheel.

3. Remove the steering wheel.

4. Remove the steering wheel cover (A) after loosening the screws.








5. Disconnect the cruise control switch connector (A).




6. Remove the cruise control switch (A) after unfastening the screws.




7. Install in the reverse order of removal.

Inspection

Measuring Resistance
1. Disconnect the cruise control switch connector from the control switch.




2. Measure resistance between terminals on the control switch when each function switch is ON (switch is pressed).





3. If not within specification, replace switch.

Measuring Voltage
1. Connect the cruise control switch connector from the control switch.
2. Measure voltage between terminals on the harness side connector when each function switch is ON (switch is depressed).





3. If not within specification, inspect the control switch resistance.
The measuring resistance value is not within specification, replace the switch and measure the voltage again.
4. If resistance is OK but, measuring voltage is not within specification, inspect the wiring harness and connectors between the switch and the ECM.
pro multis · About Operation CHARM