Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Elantra GT L4-1.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Core >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Core: Service and Repair





Replacement

1. Disconnect the negative (-) battery terminal.
2. Remove the heater & blower assembly.

3. Separate the blower unit from the heater unit after loosening the screws.




4. Remove the heater unit lower case (A) after loosening the mount screws.




5. Pull out the evaporator core (A) from heater unit.





NOTE:
- Be careful that the inlet and outlet pipe are not bent during heater core and evaporator core removal/installation.

6. Install in the reverse order of removal.

NOTE:
- If you're installing a new evaporator, add refrigerant oil (PAG OIL).
- Replace the O-rings with new ones at each fitting, and apply a thin coat of refrigerant oil before installing them. Be sure to use the right O-rings for R-134a to avoid leakage.
- Immediately after using the oil, replace the cap on the container, and seal it to avoid moisture absorption.
- Do not spill the refrigerant oil on the vehicle; it may damage the paint; if the refrigerant oil contacts the paint, wash it off immediately
- Apply sealant to the grommets.
- Make sure that there is no air leakage.
- Do not interchange the inlet and outlet heater hoses and install the hose clamps securely.
- Refill the cooling system with engine coolant

CAUTION:
- Charge the system and test its performance.

pro multis · About Operation CHARM