Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2013 >> Elantra GT L4-1.8L >> Repair and Diagnosis >> Heating and Air Conditioning >> Evaporator Temperature Sensor / Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Evaporator Temperature Sensor / Switch: Service and Repair





Inspection

1. Turn the ignition switch OFF.
2. Disconnect the evaporator temperature sensor connector.
3. Measure resistance between terminal "+" and "-" of the evaporator temperature sensor.




4. Connect the evaporator temperature sensor connector.
5. Run the engine and turn the A/C switch ON, then measure the voltage between the terminals of the harness connector.
Specification






Replacement

1. Disconnect the negative (-) battery terminal.
2. Disconnect the evaporator temperature sensor connector (A).




3. Remove the evaporator temperature sensor (B) by pulling it out after rotating it 90° in a counterclockwise direction.
4. Install in the reverse order of removal.
pro multis · About Operation CHARM