Repair Procedures

Replacement

Floor Console Replacement

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the console upper cover (A).




2. Using a screwdriver or remover, remove the parking brake cover (A).




3. Remove the console tray mat (A).




4. Remove the console extension side cover (A).
[LH]




[RH]




5. After loosening the mounting screws and bolts, then remove the floor console assembly (A).




6. Disconnect the floor console main connector (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure all connectors are connected in properly.
- Replace any damaged clips.