ID Registration Cannot Be Completed

ID REGISTRATION CANNOT BE COMPLETED


Description


DESCRIPTION
The ID of the transmitter installed in each wheel cannot be registered in the tire pressure monitoring system.
Inspect the transmitter or the tire pressure monitoring system circuit.




ID REGISTRATION CANNOT BE COMPLETED


Diagnosis Procedure

1.CHECK ID REGISTRATION
1. Perform ID registration of all transmitters. Refer to Transmitter ID Registration Procedure.
2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for
10 minutes.
3. Check all tire pressures with CONSULT-III "DATA MONITOR" within 5 minutes.





Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK TRANSMITTER
1. Perform trouble diagnosis for transmitters. Refer to C1708.
2. Perform ID registration of all transmitters. Refer to Transmitter ID Registration Procedure.
Can ID registration of all transmitters be completed?
YES - INSPECTION END
NO - Replace the transmitter. Refer to Exploded View.