Self-Diagnosis Function

INTRODUCTION AND GENERAL DESCRIPTION
The self-diagnostic system diagnoses sensors, door motors, blower motor and multiplex communication errors, etc. by system line. Refer to applicable sections (items) for details. Shifting from normal control to the self- diagnostic system is accomplished by starting the engine (turning the ignition switch from "OFF" to "ON") and pressing the Face switch for at least 5 seconds. The Face switch must be pressed within 10 seconds after starting the engine (ignition switch is turned "ON"). This system will be canceled by either pressing auto switch or turning the ignition switch "OFF". Shifting from one step to another is accomplished by means of rotating temperature switch, as required.
Additionally shifting from STEP 5 to AUXILIARY MECHANISM is accomplished by means of pushing FAN switch.








STEP BY STEP PROCEDURE