Drive Axles, Bearings and Joints: Service and Repair

Thoroughly clean all parts in cleaning solvent and dry with compressed air. Check parts for evidence of deformation or other damage.

DRIVESHAFT
Replace driveshaft if it is twisted or cracked.

BOOT
Check boots for fatigue, cracks or wear. Replace boot with new boot bands.

INNER JOINT, ASSEMBLY
1. Replace any parts of joint which show signs of scorching, rust, wear or excessive play.
2. Check serration for deformation. Replace if necessary.
3. Check slide joint housing for any damage. Replace if necessary.

OUTER JOINT, ASSEMBLY
Replace joint assembly if it is deformed or damaged.

SUPPORT BEARING
Ensure wheel bearing rolls freely and is free from noise, cracks, pitting or wear.

SUPPORT BEARING BRACKET
Check bracket for cracks with a magnetic exploration or dyeing test.