Related Diagnostic Information

DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
1) Start engine and warm it up sufficiently.
2) Perform test drive for at least 10 seconds continuously under the following recommended conditions.

Engine speed :
2,000 - 3,200 rpm
Intake manifold vacuum:
40.0 to -20.0 kPa (-300 to -150 mmHg, -11.81 to -5.91 inHg)
Gear position :
Suitable position (except "N" or "P" position)

3) Stop the vehicle, turn ignition switch "OFF", wait at least 5 seconds and then turn "ON".
4) Perform "Diagnostic Test Mode II (Self-diagnostic results)" with ECM.
Even though Diagnostic Trouble Code is not detected, perform the above test drive at least one more time.