Control Module: Service and Repair

Removal
1. Turn ignition switch OFF and disconnect negative battery terminal.
2. Remove console box.
3. Remove cluster lid C.
4. Remove audio assembly and A/C control unit.
5. Remove instrument lower panel on driver side.
6. Remove glove box.
7. Remove instrument lower panel on passenger side.
8. Remove instrument lower center panel.





9. Remove transfer control unit.

Installation
- Installation is in the reverse order of removal.
- When installing transfer control unit, tighten transfer control unit lock nut.
Tightening torque: 4.3 - 5.8 Nm (0.44 - 0.59 kg-m, 38 - 51 inch lbs.)