Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Receiver Dryer: Service and Repair


Removing and Installation for Liquid Tank (To be applied after the middle of June 2001.)









REMOVAL
1. Use refrigerant collecting equipment (for HFC134a) to discharge refrigerant.
2. Remove front grille.
3. Unscrew, and remove the securing bracket piping.
4. Unscrew liquid tank securing bands.
5. Pull out the liquid tank and liquid tank securing bands through the top.

INSTALLATION
Installation is the reverse order of removal. Note the following.

CAUTION: Replace refrigerant pressure sensor O-ring with a new one. Apply compressor oil prior to installation.

Securing bracket piping mounting screws
Tightening torque [N-m (kg.m)] : 4 - 5 (0.41 - 0.51)

Liquid tank securing band mounting screw
Tightening torque [N-m (kg.m)] : 2.94 - 3.82 (0.3 - 0.38)