Active Test

Caution
- Do not perform the active test while driving.
- Active test cannot be started while ICC system warning indicator illuminates.

1. Touch "ACTIVE TEST" on selection screen "CONSULT-II INSPECTION PROCEDURE" .




2. Touch any of "ICC BUZZER 1", "METER LAMP", "STOP LAMP" and "BOOSTER SOL/V 3" on selection screen.
3. Touch necessary item and "START".
4. Active test screen will be shown.

ICC Buzzer 1:

Meter Lamp:

Stop Lamp:

Booster Sol/V3
- Touch any of "MODE 1", "MODE 2", "MODE 3" to check that following operation condition is caused by operating monitor and brake pedal.
- "START" is displayed 10 seconds after operation start. (Active test is completed.)