Memory Automatic Set

AUTOMATIC DRIVE POSITIONER
MEMORY AUTOMATIC SET
Two drive positions can be retained in the memory. Press memory switch to set driver's seat to preset position.











NOTE: When memory switch for which driver's seat positions are already retained in memory is pressed, new seat positions will be retained in memory in place of the previously set positions.

Drive position is erased from the memory when battery cable is disconnected more than 30 seconds. After connecting battery cable, perform initialization procedures.













NOTE: 1. Do not keep memory seat cancel switch pressed as it will not operate.
2. Automatic exiting setting will be performed.
3. The driver's seat position (see the Table) operates in the order of priority.