Keyless Systems/TPMS - SIGNAL TECH II(R) Diag. Tool
Classification: WT10-002BReference: ITB10-023A
Date: January 6, 2011
SIGNAL TECH II DIAGNOSTIC TOOL
This bulletin has been amended. Notes below and APPLIED VEHICLES have been amended. Please discard previous versions of this bulletin.
APPLIED VEHICLES:
All Infiniti with Tire Pressure Monitor System (TPMS), Remote Keyless Entry, or Intelligent Key.
NOTE:
Failure to update Signal Tech II may lead to misdiagnosis of vehicles built after February 28, 2010.
^ The latest software is available on the CONSULT III PC at: ASIST > Specialty Tools > Signal Tech II.
^ If you should encounter problems updating Signal Tech II, contact Techmate.
^ Future updates will be released as needed. Check ASIST frequently for this information.
SERVICE INFORMATION
If service is required on a vehicle's Tire Pressure Monitor System (TPMS) remote keyless entry or Intelligent Key the Signal Tech II (special tool J-50190) can be used for diagnostics.
Signal Tech II will quickly:
^ Activate and display TPMS Sensor IDs
^ Display tire pressure reported by the TPMS sensor
^ Read TPMS DTCs and register TPMS IDs
^ Store and print reports for warrantable repairs
^ Check intelligent key relative signal strength
^ Test remote keyless entry relative signal strength
^ Confirm vehicle Intelligent Key antenna relative signal strength output
^ Read ENGINE DTCs
Other available information for Signal Tech II:
^ Signal Tech II Quick Start Guide: ASIST > Tools & Equipment> Tool & Equipment Web Page
^ Signal Tech II Users Guide: ASIST > Tools & Equipment> Tools & Equipment Web Page
^ Tool Flyer: ASIST > Tools & Equipment> Tools & Equipment Web Page> Infiniti Essential Tool Flyers
^ Tech Talk Article: ASIST > Tech Support Info> TECH TALK / XTRA> Spring 2010 issue