Diagnostic Strategies
Work Flow1. Check the symptom and customer's requests.
2. Understand the system description. Refer to "System Description".
3. Perform the preliminary check. Refer to "Preliminary Check" .
4. Perform the communication diagnosis.
With CONSULT-II, refer to "IVMS Communication Diagnosis". Without CONSULT-II, refer to "COMMUNICATION DIAGNOSIS".
Is the communication diagnosis result OK?
OK, GO TO 7.
NG, GO TO 5.
5. Repair or replace depending on the diagnosis result.
6. Perform the communication diagnosis again.
With CONSULT-II, refer to "IVMS Communication Diagnosis". Without CONSULT-II, refer to "COMMUNICATION DIAGNOSIS".
Is the communication diagnosis result OK?
OK, GO TO 7.
NG, GO TO 5.
7. Perform the self-diagnosis.
With CONSULT-II, refer to "SELF-DIAGNOSIS RESULTS" .
Without CONSULT-II, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER" .
Is the self-diagnosis result OK?
OK, GO TO 11.
NG, GO TO 8.
8. Repair or replace depending on the self-diagnosis result.
9. Perform the self-diagnosis again.
With CONSULT-II, refer to "SELF-DIAGNOSIS RESULTS" .
Without CONSULT-II, refer to "ON BOARD DIAGNOSIS FOR AUTOMATIC DRIVE POSITIONER" .
Is the self-diagnosis result OK?
OK, GO TO 11.
NG, GO TO 8.
10. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart" .
11. Does the automatic drive positioned system operate normally?
OK, GO TO 12.
NG, GO TO 3.
12. Inspection end.