Brake System

Precautions for Brake System
^ Recommended fluid is brake fluid "DOT 3".
^ Never reuse drained brake fluid.
^ Be careful not to splash brake fluid on painted areas.
^ To clean or wash all parts of master cylinder, disc brake caliper and wheel cylinder, use clean brake fluid.
^ Never use mineral oils such as gasoline or kerosene. They will ruin rubber parts of the hydraulic system.





^ Use flare nut wrench when removing and installing brake tube.
^ Always torque brake lines when installing.
^ Before working, turn the ignition switch OFF and disconnect the connectors for the VDC actuator or the battery cables.
^ Burnish the brake contact surfaces after refinishing or replacing drums or rotors, after replacing pads or linings, or if a soft pedal occurs at very low mileage.
Refer to "Brake Burnishing Procedure".

WARNING:
^ Clean brake pads and shoes with a waste cloth, then wipe with a dust collector.