Precautions for AV and NAVI Control Unit Replacement

Precautions for AV and NAVI Control Unit Replacement
- When replacing the AV and NAVI control unit, eject the map DVD-ROM before disconnecting the battery.
- The AV and NAVI control unit has the following information stored in its memory. Record the memory contents before replacing the control unit, and input them in the new unit as necessary.


- Preset frequency
- Area for indicating station, selection of overlapped stations


- Program status


- Volume balance memory set values
- Equalizer memory set values


- Brightness of light when ON/OFF
- Dimming switching
- Display color switching


- Latest status (map screen/BIRDVIEW(TM), reduced scale, rotation angle of map screen, route guide ON/OFF, track ON/OFF, etc.)
- Current position
- Destination, passing point 1 - 5
- Registered places, their names, etc.

NOTE: Only removing the battery does not erase the memory.