Work Support

WORK SUPPORT

Operation procedure
1. Touch "INTERIOR ILLUMINATION" on the "SELECT TEST ITEM" screen.
2. Touch "WORK SUPPORT" on the "SELECT DIAG MODE" screen.
3. Touch "SET INT-L LOGIC-TIM" or "SET I/L LGC-D-UNLCK" on the "SELECT WORK ITEM" screen.
4. Touch "START".
5. Touch "NORMAL"/"MODE 1 - 3" of which setting is to be changed (for the interior lamp logic timer setting only).
6. Touch "CHANGE SET".
7. The setting will be changed and the current setting status will be displayed.
8. Touch "END".

Display item list
Refer to "SETTING CHANGE FUNCTION".