Horn: Service and Repair

Removal and Installation

REMOVAL (HORN HI)




1. Remove mass air flow sensor cover, refer to "ENGINE ROOM COVER".
2. Disconnect horn connector.
3. Remove horn.

INSTALLATION (HORN HI)
Tighten horn bolt to specified torque.

Horn bolt : 16 - 18 Nm (1.6 - 1.8 kg-m, 12 - 13 ft-lb)

REMOVAL (HORN LOW)




1. Remove front grille, refer to "FRONT GRILLE".
2. Disconnect horn connector.
3. Remove horn.

INSTALLATION (HORN LOW)
Tighten horn bolt to specified torque.

Horn bolt : 16 - 18 Nm (1.6 - 1.8 kg-m, 12 - 13 ft-lb)