Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2003 >> Q45 V8-4.5L (VK45DE) >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Tire Monitoring System >> Testing and Inspection >> Programming and Relearning >> Transmitter ID Registration Procedure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmitter ID Registration Procedure

ID Registration Procedure


ID REGISTRATION WITH TRANSMITTER ACTIVATION TOOL
1. Turn ignition switch "OFF".
2. Connect CONSULT-II to data link connector.
3. Touch "START", "AIR PRESSURE MONITOR", "WORK SUPPORT" and "ID REGIST".





4. With the transmitter activation tool (J-45295) pushed against the front-left transmitter, press the button then keep 5 seconds.





5. Register the IDs in order from FR LH, FR RH, RR RH, to RR LH. When ID registration of each wheel has been completed, a buzzer sounds and hazard warning lamp blinks.
6. After completing all ID registrations, press "END" to complete the procedure.

NOTE: Be sure to register the IDs in order from FR LH, FR RH, RR RH, to RR LH, or the self-diagnostic results display will not function properly.



ID REGISTRATION WITHOUT TRANSMITTER ACTIVATION TOOL
1. Turn ignition switch "OFF".
2. Connect CONSULT-II to data link connector.
3. Touch "START", "AIR PRESSURE MONITOR", "WORK" SUPPORT" and "ID REGIST".





4. Adjust the tire pressure to the values shown in the table for ID registration, and drive the vehicle at 15 km/h (9.4 MPH) or more for a few minutes.





5. After completing all ID registrations, press "END" to complete the procedure.

pro multis · About Operation CHARM