A/T Communication Line

DTC A/T COMMUNICATION LINE

Description
^ The ECM and TCM provide mutual communication in relation to engine output control signal (ignition timing retard signal) during rapid standing starts/acceleration. With this consistent real-time control, the shifting feel is substantially improved.





TCM TERMINALS AND REFERENCE VALUE





ON BOARD DIAGNOSIS LOGIC

DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE





After the repair, perform the following procedure to confirm the malfunction is eliminated.

With CONSULT-II
1) Turn ignition switch "ON".
2) Select "DATA MONITOR" mode for "A/T" with CONSULT-II.
3) Wait at least 6 seconds or start engine and wait for at least 6 seconds.

No Tools








1) Turn ignition switch "ON".
2) Wait at least 6 seconds or start engine and wait for at least 6 seconds.
3) Perform self-diagnosis. Refer to TCM SELF-DIAGNOSTIC PROCEDURE (No Tools).





Wiring Diagram - AT - LAN

Test 1 Of 5:

Test 2 Of 5:

Test 3 Of 5:

Test 4 Of 5:

Test 5 Of 5:

Diagnostic Procedure