Cylinder Head Specifications

Cylinder Head

Valve





VALVE





VALVE CLEARANCE





VALVE SPRING





VALVE LIFTER





AVAILABLE LIFTERS





VALVE GUIDE








Valve Seat








Camshaft and Camshaft Bearing








Outer Component Parts












cylinder head outside bolts
Step 1 98.1 Nm (10 kg-m, 72 ft. lbs.)
Step 2 Completely loosen all bolts in reverse order shown.
Step 3 34.3 to 44.1 Nm (3.5 to 4.4 kg-m, 25 to 33 ft. lbs.)
Step 4; 90 to 95 degrees clockwise. [target: 90 degrees (angle tightening)]
Step 5; 90 to 95 degrees clockwise again. [target: 90 degrees (angle tightening)]

Intake Manifold Torque Sequence:

Intake Manifold
Step 1 5 to 10 Nm (0.5 to 1.0 kg-m, 44 to 86 inch lbs.)
Step 1 26 to 31 Nm (2.7 to 3.2 kg-m, 20 to 23 ft. lbs.)*
*: Tighten all bolts and nuts to the final torque, evenly dividing the tightening into at least three steps.





Throttle Body
Step 1 8.8 to 10.8 Nm (0.9 to 1.1 kg-m, 79 to 95 inch lbs.)
Step 2 18 to 21 Nm (1.8 to 2.2 kg-m, 13 to 15 ft. lbs.)





Upper Intake Manifold Collector 18 to 21 Nm (1.8 to 2.2 kg-m, 13 to 15 ft. lbs.)

LOWER INTAKE MANIFOLD COLLECTOR TORQUE SEQUENCE:

Lower Intake Manifold Collector 18 to 21 Nm (1.8 to 2.2 kg-m, 13 to 15 ft. lbs.)

EXHAUST MANIFOLD TORQUE SEQUENCE / RIGHT BANK:

Exhaust manifold 28 - 32 Nm (2.9 - 3.3 kg-m, 21 - 24 ft. lbs.)