Torque and Sequence

When installing transmission assembly to the engine, attach the fixing bolts in accordance with the following standard.








For 2WD models








For AWD models





Tighten bolt 1, 2 and 3 temporarily to prevent dislocation. After that tighten them in order (1 -> 2 -> 3), and then tighten other bolts.
Tightening Torque 7.9 Nm (0.81 kgf-m, 70 inch lbs.)

Flywheel





^ When installing transmission to the engine, install mounting bolts in accordance with the standards.

Transmission Pan





Tighten oil pan mounting bolts to the specified torque in numerical order shown in the figure after temporarily tightening them.
Tightening Torque 7.9 Nm (0.81 kgf-m, 70 inch lbs.)