DTC Work Support Mode

DTC WORK SUPPORT MODE
Operation Procedure

1. Touch DTC WORK SUPPORT on SELECT DIAG MODE screen.

2. Touch select item menu.

3. Touch START.

4. Perform driving test according to DTC Confirmation Procedure in TROUBLE DIAGNOSIS FOR DTC.

^ When testing conditions are satisfied, CONSULT-II screen changes from OUT OF CONDITION to TESTING.

5. Stop vehicle.

^ If NG appears on the screen, malfunction may exit. Go to Diagnostic Procedure.

6. Perform test drive to check gear shift feeling in accordance with instructions displayed.
7. Touch YES or NO.
8. CONSULT-II procedure is ended.

^ If NG appears on the screen, a malfunction may exit. Go to Diagnostic Procedure.