Scan Tool Testing and Procedures

Work Flow
1. Check the symptom and customer's requests.
2. Understand the system description.
3. Perform the self-diagnosis results, using CONSULT-II. Refer to SE-35, "CONSULT-II Function (AUTO DRIVE POS.)". Description of On-Board Diagnostics
4. Repair or replace depending on the self-diagnostic results.
5. Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to "Symptom Chart".
6. Does the automatic drive positioned system operate normally? If it is normal, GO TO 8.
If it is not normal, GO TO 3.
7. INSPECTION END