Trouble Diagnosis Flow Chart

Trouble Diagnosis Flow Chart:

TROUBLE DIAGNOSIS FLOW CHART
Depending on the control unit which performs CAN communication, "U1010" may be indicated as the result of self-diagnosis. Replace the control unit if "U1010" is indicated.

- Step 1: Refer to "SELECTING CAN SYSTEM TYPE (HOW TO USE SPECIFICATION TABLE)".
- Step 2: Refer to "ACQUISITION OF DATA BY CONSULT-II".
- Step 3: Refer to "HOW TO USE CHECK SHEET TABLE".
- Step 4: Refer to "Example of Filling in Check Sheet When Initial Conditions Are Reproduced".
- Step 5: Check and repair according to system diagnosis.