Front Door: Service and Repair

DOOR

Removal and Installation

REMOVAL

CAUTION:
- When removing and installing the door assembly, support the door with a jack and cloth to protect the door and body.
- When removing and installing door assembly, be sure to carry out the fitting adjustment.
- Check the hinge rotating part for poor lubrication. If necessary, apply "body grease".
- After installing, check operation.
- Operate with two workers, because of its heavy weight.

1. Remove the door finisher.
2. Remove the door window and module assembly.




3. Pull the lever and remove the door harness connector while removing tabs of door harness connector.




4. Remove the mounting bolts of the check link on the vehicle.




5. Remove the door-side hinge mounting nuts, then remove the door assembly.

INSTALLATION
Install in the reverse order of removal.