Cruise Test - Part 3
Cruise Test - Part 31. MANUAL MODE FUNCTION
Move to manual mode from "D" position.
Does it switch to manual mode?
YES >> GO TO 2.
NO >> Enter a check mark at AT-205, "Cannot Be Changed to Manual Mode" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Example of Diagnosis Sheet
2. CHECK SHIFT DOWN
During manual mode driving, is downshift from M5 -> M4 -> M3 -> M2 -> M1 performed?
With CONSULT-II
Read the gear position. Refer to AT-89, "DATA MONITOR MODE". Data Monitor Mode
Is downshifting correctly performed?
YES >> GO TO 2.
NO >> Enter a check mark at "A/T Does Not Shift" at the corresponding position (5th -> 4th, 4th -> 3rd, 3rd -> 2nd, 2nd -> 1st) on the AT-45, "DIAGNOSTIC WORKSHEET", then continue the road test. Example of Diagnosis Sheet
3. CHECK ENGINE BRAKE
Check engine brake.
Does engine braking effectively reduce speed in M1 position?
YES >> 1. Stop the vehicle.
2. Perform self-diagnostics. Refer to AT-86, "SELF-DIAGNOSTIC RESULT MODE", AT-95, "Diagnostic Procedure Without CONSULT-II".
Self-Diagnostic Result Mode
NO >> Enter a check mark at AT-211, "Vehicle Does Not Decelerate by Engine Brake" on the AT-45, "DIAGNOSTIC WORKSHEET", then continue trouble diagnosis. Example of Diagnosis Sheet