Power Seat Control Module: Service and Repair

Exploded View IP-11 (Part 1):

Exploded View IP-11 (Part 2):

Exploded View

ON-VEHICLE REPAIR

DRIVER SEAT CONTROL UNIT

Exploded View
Refer to Exploded View IP-11.

Removal and Installation

REMOVAL

CAUTION: When removing and installing, use shop cloths to protect parts from damage.




1. Remove the driver seat (1).
2. Remove the mounting bolts (A).
3. Remove driver seat control unit (2).

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- Clamp the harness in position.

NOTE: After installing the driver seat, perform additional service when replacing control unit. Refer to Programming and Relearning