Operation Procedure

OPERATION PROCEDURE
1. Turn ignition switch OFF.




2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector, and turn ignition switch ON.




3. Touch "START (NISSAN BASED VHCL)".




4. Touch "MULTI AV"
If "MULTI AV" is not indicated, check the following item.
- AV (NAVI) control unit power supply and ground circuit.
- CONSULT-II data link connector (DLC) circuit Refer to Information Bus Precautions When Using CONSULT-II




5. Select diagnosis item on "SELECT DIAG MODE" screen.