Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Self-Diag Results
SELF-DIAG RESULTSOperation Procedure
1. Touch "ADAPTIVE LIGHT" on "SELECT SYSTEM" screen.
2. Touch "SELF-DIAG RESULTS" on the "SELECT DIAG MODE" screen.
3. Check display content in self-diagnostic results.
CAUTION: DTC B2503 and B2504 cannot be detected before the swivel operation. Thus, perform swivel operation first, and then check the display in self-diagnostic results.
U1000-U1010:
B2503-B2514:
B2515-B2520:
B2521-B2523:
Description of DTC and Solutions after Detection
CAUTION:
- If DTC relating to CAN communication [U1000] and other components are displayed at the same time, diagnose CAN communication first.
- Make sure of the normal operation after the parts (except AFS control unit) replacement according to the self-diagnosis results. Delete the malfunction history.
Display Results
- 0: There is malfunction now.
- 1 - 39: Displays when it is normal at present and finds malfunction in the past. It increases in order of 0 -> 1 -> 2...38 -> 39 after returning to the normal condition whenever IGN OFF->ON. If it is over 39, it is fixed to 39 until the self-diagnostic results are erased. It returns to 0 when malfunction is detected again in the process.