Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Changing Differential Gear Oil
Exploded View RFD-18:
DIFFERENTIAL GEAR OIL
Changing Differential Gear Oil
DRAINING
1. Stop engine.
2. Remove drain plug (1) and drain gear oil.
3. Set a gasket on drain plug (1) and install it to final drive assembly and tighten to the specified torque. Refer to Exploded View RFD-18.
CAUTION: Do not reuse gasket.
FILLING
1. Remove filler plug (1). Fill with new gear oil until oil level reaches the specified level near filler plug mounting hole.
Oil grade and Viscosity: Refer to MA-12, "Fluids and Lubricants". Maintenance
Oil capacity: Approx. 1.4 l (3 US pt, 2-1/2 Imp pt)
2. After refilling oil, check oil level. Set a gasket to filler plug (1), then install it to final drive assembly.
CAUTION: Do not reuse gasket.