Push-Button Ignition Switch Does Not Operate
PUSH-BUTTON IGNITION SWITCH DOES NOT OPERATEDescription
- Before performing the diagnosis in the following table, check "Work Flow". Refer to PCS-36, "Work Flow". Diagnosis and Repair Work Flow
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
Conditions of Vehicle (Operating Conditions)
- "ENGINE START BY I-KEY" in "WORK SUPPORT" is ON when setting on CONSULT-III.
- One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
Diagnosis Procedure
