Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2008 >> QX56 AWD V8-5.6L (VK56DE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair

Camshaft Position Sensor (PHASE)

REMOVAL
1. Remove engine room cover using power tool.
2. Remove air duct and resonator assembly.
3. Disconnect camshaft position sensor connector.




4. Remove camshaft position sensor (2) from Intake valve timing control solenoid valve cover (LH) (1).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION: Replace the O-ring (3) of the camshaft position censor with a new one, then lubricate O-ring with engine oil before installing.

Camshaft position sensor bolt: 9.6 N.m (0.98 kg-m, 85 in-lb)
pro multis · About Operation CHARM