Panic Alarm Function Does Not Operate

PANIC ALARM FUNCTION DOES NOT OPERATE


Description


NOTE:
- Before performing the diagnosis following procedure, check "Work Flow". Refer to Diagnosis and Repair Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATION CONDITIONS)
- Ignition switch is in OFF or LOCK position.
- Intelligent Key is removed from key slot.




PANIC ALARM FUNCTION DOES NOT OPERATE


Diagnosis Procedure

1.CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent key button?
YES - GO TO 2.
NO - Go to Door Does Not Lock/Unlock With Intelligent Key.
2.CHECK VEHICLE SECURITY ALARM OPERATION
Check vehicle security alarm operation.
Does alarm (headlamp and horn) active?
YES - GO TO 3.
NO - Go to Vehicle Security Alarm Does Not Activate.
3.CHECK "PANIC ALARM SET" SETTING IN "WORK SUPPORT"
Check "PANIC ALARM SET" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 4.
NO - Set "PANIC ALARM SET" setting in "WORK SUPPORT".
4.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.