Component Function Check
MAP LAMP CIRCUIT
Component Function Check
CAUTION:
Check the following item first.
- Hospitality lighting power supply 1 circuit (When both side lamps are not turned ON.)
- Map lamp bulbs
1.CHECK MAP LAMP CONTROL FUNCTION
CONSULT-III ACTIVE TEST
1. Turn ignition switch ON.
2. Select "MAP LAMP-DR" or "MAP LAMP-AS" of TOTAL ILLUM C/U active test item.
3. While operating the test items, check map lamps operation.
Are the map lamps turned ON/OFF?
YES - Map lamp circuit is normal.
NO - Refer to Diagnosis Procedure.