Oil Filter: Service and Repair

OIL FILTER


Removal and Installation


REMOVAL

CAUTION:
- Oil filter is provided with relief valve. Use genuine NISSAN oil filter or an equivalent.
- Be careful not to get burned when engine and engine oil may be hot.
- When removing, prepare a shop cloth to absorb any engine oil leakage or spillage.
- Never allow engine oil to adhere to drive belts.
- Completely wipe off any engine oil that adheres to engine and vehicle.
1. Remove engine undercover with power tool.





2. Using oil filter wrench [SST: KV10115801 (J38956)] (A), remove oil filter.

INSTALLATION
1. Remove foreign matter adhering to oil filter installation surface.





2. Apply engine oil to the oil seal contact surface of new oil filter.
3. Screw oil filter manually until it touches the installation surface, then tighten it by 2/3 turn (A). Or tighten to the specification.






Oil filter:
Tightening Torque: 17.7 Nm (1.8 kg-m, 13 ft-lb)