Check Sliding Switch Circuit

AUTOMATIC DRIVE POSITIONER


Check Sliding Switch Circuit

1.CHECK FUNCTION
With CONSULT-III
With "SLIDE SW-FR, SLIDE SW-RR" on the DATA MONITOR, operate the sliding switch to check ON/OFF operation.





Without CONSULT-III
1. Turn ignition switch OFF.





2. Check voltage between driver seat control unit connector and ground.





OK or NG
OK - Sliding switch circuit is OK.
NG - GO TO 2.
2.CHECK SLIDING SWITCH CIRCUIT HARNESS CONTINUITY
1. Disconnect driver seat control unit connector and power seat switch connector.





2. Check continuity between driver seat control unit connector and power seat switch connector.





3. Check continuity between driver seat control unit connector and ground.





OK or NG
OK - GO TO 3.
NG - Repair or replace harness.
3.CHECK SLIDING SWITCH





Check continuity between power seat switch terminals.





OK or NG
OK - Replace driver seat control unit.
NG - Replace power seat switch.