Refilling

TRANSFER FLUID


Refilling






1. Remove filler plug (1) and gasket. Then fill fluid up to mounting hole for the filler plug.

Fluid and viscosity : Refer to MA-10, "Fluids and Lubricants". Maintenance
Fluid capacity : Refer to DLN-73, "General Specifications". Mechanical Specifications

CAUTION:
Carefully fill the fluid. (Fill up for approximately 3 minutes.)
2. Leave the vehicle for 3 minutes, and check the fluid level again.
3. Set a new gasket onto filler plug and install it on transfer and tighten to the specified torque. Assembly.

CAUTION:
Never reuse gasket.