Cylinder Head Assembly

SERVICE DATA AND SPECIFICATIONS (SDS)


Cylinder Head


CYLINDER HEAD






VALVE DIMENSIONS






VALVE GUIDE






VALVE SEAT






VALVE SPRING





Cylinder Head Bolts





Whenever the size difference between (C) and (B) exceeds the limit, replace them with new one

Limit [(C) - (B)] : 0.18 mm (0.0071 in)

A : Measuring point
e : 48 mm (1.89 in)
d : 11 mm (0.43 in)





Tighten all bolts 105 Nm (11 kg-m, 77 ft-lb)
In reverse order
Loosen all bolts 0 Nm (0 kg-m, 0 ft-lb)
Tighten all bolts 40.0 Nm (4.1 kg-m, 30 ft-lb)
Tighten all bolts Angle tightening: 95 degrees
Tighten all bolts Angle tightening: 95 degrees again

Head surface distortion
Standard Less than 0.03 mm (0.0012 in)
Limit 0.1 mm (0.004 in)

Camshaft bracket bolts





No. 7 to 10 1.96 Nm (0.20 kg-m, 1 ft-lb)
No. 1 to 6 1.96 Nm (0.20 kg-m, 1 ft-lb)
No. 1 to 10 5.88 Nm (0.60 kg-m, 4 ft-lb)
No. 1 to 10 10.4 Nm (1.1 kg-m, 8 ft-lb)

Camshaft Gear/Sprocket Specifications

Intake Manifold Specifications

Exhaust Manifold Specifications