Operation CHARM: Car repair manuals for everyone.
Home >> Infiniti >> 2010 >> QX56 AWD V8-5.6L (VK56DE) >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Body Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Module: Service and Repair





BCM (BODY CONTROL MODULE)


Removal and Installation


REMOVAL

NOTE:
If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. ID Registration Procedure.
1. Disconnect the battery negative terminal.
2. Remove the lower knee protector. Exploded View.





3. Remove the screw and release the BCM.
4. Disconnect the connectors and then remove the BCM.

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
- When replacing BCM, it must be configured. Special Repair Requirement.
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to the CONSULT-III operation manual for the initialization procedure.
- When replacing BCM, perform ID registration procedure of low tire pressure warning system. ID Registration Procedure.
pro multis · About Operation CHARM