Key Reminder Function Does Not Operate

KEY REMINDER FUNCTION DOES NOT OPERATE





Diagnosis Procedure
1.CHECK "ANTI KEY LOCK IN FUNCTI" SETTING IN "WORK SUPPORT"
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "ANTI KEY LOCK IN FUNCTI" in "WORK SUPPORT" mode.
3. Check "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT". Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "On" in "ANTI KEY LOCK IN FUNCTI".
2.CHECK INSIDE KEY ANTENNA
Check inside key antenna.
- Instrument center: B2621.
- Console: B2622.
- Trunk room: B2623.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK DOOR SWITCH
Check door switch. Door Switch.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK TRUNK ROOM LAMP SWITCH
Check trunk room lamp switch. Testing and Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK UNLOCK SENSOR
Check unlock sensor. Unlock Sensor.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.REPLACE BCM
- Replace BCM. Service and Repair.
- Confirm the operation after replacement.
Is the result normal?
YES - INSPECTION END
NO - Check intermittent incident. Intermittent Incident.