Removal And Installation

HYDRAULIC BODY-MOTION CONTROL SYSTEM


ACCUMULATOR : Removal and Installation


REMOVAL

Accumulator Assembly LH

WARNING:





Never remove mounting bolts of protector.
1. Reduce system pressure. Pressure Reducing Method.





2. Disconnect pipe (A) of accumulator assembly LH from left side
3-way (B).





3. Disconnect pipe (A) of accumulator assembly LH from left side middle joint (B).
4. Separate chassis and body. .
5. Remove mounting bolts of each bracket.
6. Remove mounting bolts of accumulator assembly LH.

WARNING:





Never remove mounting bolts of protector.
7. Remove accumulator assembly LH from the vehicle.
8. Perform inspection after removal. Inspection.

Accumulator Assembly RH

WARNING:





Never remove mounting bolts of protector.
1. Reduce system pressure. Pressure Reducing Method.





2. Disconnect pipe (A) of accumulator assembly RH from right side
3-way (B).





3. Remove pipe (A) of accumulator assembly RH from right side middle joint (B).
4. Separate chassis and body. .
5. Remove mounting bolts of each bracket.
6. Remove mounting bolts of accumulator assembly RH.

WARNING:





Never remove mounting bolts of protector.
7. Remove accumulator assembly RH from the vehicle.
8. Perform inspection after removal. Inspection.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Apply genuine NISSAN hydraulic suspension fluid to O-ring.
- Check connection portion of each piping for dirt or dust.





- Completely engage hooks on frame when installing accumulator assembly.