Base Audio

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING AV CONTROL UNIT : Work Procedure


1. SAVING VEHICLE SPECIFICATION

-CONSULT Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. Base Audio.
NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection".
- GO TO 2.

2. REPLACE AV CONTROL UNIT

Replace AV control unit. Base Audio.
- GO TO 3.

3. WRITING VEHICLE SPECIFICATION

-CONSULT Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Base Audio.
- GO TO 4.

4. OPERATION CHECK

Check that the operation of the AV control unit is normal.
- WORK END