Maintenance Indicator Reset

Resetting The Distance For Changing The Engine Oil





Switches for the trip computer are located on the right side of the combination meter panel. To operate the trip computer, push the side or front of the switches as shown above.

When the ignition switch is pushed to the ON position, modes of the trip computer can be selected by pushing switch A.

Push switch A until the display reads: SETTING.

Switch A and switch B are used in the setting mode to select and decide on a menu.

Push switch A to move to the warning check mode.
Push switch B to select other menus.





Go to the Maintenance submenu and select: ENGINE OIL to select or reset the distance for changing the engine oil.